Effective ways of molding man-made materials

3rd International Scientific and Technical Conference “Energy Systems”

Sevostyanov, M.V.^1 ; Il'Ina, T.N.^2 ; Martakov, I.G.^1

Department of Technological Complexes Machines and Mechanisms, Belgorod State Technological University of V.G. Shukhov, Kostyukov St.46, Belgorod

308012, Russia^1

Department of Heat Supply and Ventilation, Belgorod State Technological University of V.G. Shukhov, Kostyukov St.46, Belgorod

308012, Russia^2

关键词: Activated materials;    Man made material;    Molding technologies;    New high;    Physical-mechanical properties;    Technogenic materials;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/552/1/012038/pdf
DOI  :  10.1088/1757-899X/552/1/012038

来源: IOP

【 摘 要 】

The article is devoted to the development of multifunctional technological complexes for obtaining highly dispersed activated materials, including fast-hardening microfibrated composite mixtures. Special attention is paid to the development of conditions for their effective homogenization and the molding technology of various charges. Presented experimental design, aimed at improving the process of forming man-made mixtures. A low-Tonnage technological complex for the utilization of technogenic materials with various physical-mechanical properties was developed. The urgency of the development of techniques and technology for the utilization of man-made materials by means of compaction when creating new high-Tech industries is shown.