Online air velocity control, temperature and humidity monitoring system for clean room using Raspberry Pi

1st Siliwangi International Conference on Innovation in Research 2018

Sunardi, A.^1 ; Agus, D.^1 ; Aditya, H.^1 ; Susila, W.^1

Electrical Engineering Department, Pamulang University, Kampus Viktor, Jl. Raya Puspiptek, Setu, Kota Tangerang Selatan, Banten

15314, Indonesia^1

关键词: Air flow control;    Air velocities;    Humidity monitoring;    Laminar airflow;    Measured parameters;    Online monitoring;    Pharmaceutical industry;    Temperature and humidities;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/550/1/012011/pdf
DOI  :  10.1088/1757-899X/550/1/012011

来源: IOP

【 摘 要 】

The requirement of a clean room in the pharmaceutical industry is to maintain the airflow between 0.36-0.54 m/sec and record the temperature and humidity parameters. The laminar airflow machine is used to maintain the air velocity. The air velocity settings in laminar airflow machine are usually done manually by adjusting the speed control knop. In this study, we have designed a prototype of automatic air velocity control, temperature, and humidity monitoring system using Arduino nano and Raspberry Pi. The airflow control is done by the PID method. From the test results, the prototype has worked as expected. The accuracy of the measurement is ? 5% for air velocity, ? 2 ?C for temperature and ? 5% for moisture. The system can control the air velocity between 0.36 m/s to 0.54 m/s. The measured parameters then send to the server and utilized for online monitoring the air velocity, temperature, and humidity in the clean room.