Cutting Simulation Analysis of the Cutter Head of the Shield Machine

4th International Conference on Manufacturing, Material and Metallurgical Engineering

Zhao, Jingnan^1 ; Si, Xuekang^1 ; Guo, Jian^1 ; Ma, Xiaolei^1 ; Chen, Yuzhao^1 ; Li, Zichao^1 ; Dong, Yinghuai^1

Mechanical Engineering College, Tianjin University of Science and Technology, Tianjin

300222, China^1

关键词: Allowable stress;    Cutting conditions;    Cutting simulation;    Equivalent stress;    Failure criteria;    Practical engineering problems;    Structural reliability;    Work requirements;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/538/1/012031/pdf
DOI  :  10.1088/1757-899X/538/1/012031

来源: IOP

【 摘 要 】

In the process of shield machine tunneling, the interaction between cutter head and soil is very complex. In order to meet the requirements of tunneling, the cutter head was designed according to the construction conditions of Tianjin metro and the Archimedes spiral layout method. The granite model and cutter head model were respectively established by the ABAQUS. The granite model was based on the classic Drucker-Pragel model, and the failure criterion including element deletion function was employ to simulate the yield and failure of rock. The force of the cutter head under cutting condition was analyzed. The results show that the maximum equivalent stress of the cutter head is 8.216950 MPa, and the allowable stress of the cutter head material is 230 MPa, which was less than the allowable stress of the cutter head. The results indicated that the cutter head can meet the actual work requirements and has high structural reliability. The research process of cutter head arrangement provides a method for solving practical engineering problems, and the numerical simulation results provide a reference for the design of cutter head.