Virtual casting and rolling lines development

International Workshop "Advanced Technologies in Material Science, Mechanical and Automation Engineering – MIP: Engineering – 2019"

材料科学;机械制造;原子能学

Yakiv'Yuk, P.N.^1 ; Piskazhova, T.V.^1 ; Belolipetskii, V.M.^2 ; Nesterov, G.A.^1

Siberian Federal University, Institute of Nonferrous Metals and Materials Science, 95 Krasnoyarsky Rabochy Av., Krasnoyarsk

660025, Russia^1

Institute of Computational Modeling, Siberian Branch of Russian Academy of Sciences, 50/44 Akademgorodok, Krasnoyarsk

660036, Russia^2

关键词: Air cooling;    Casting and rolling;    Complex sites;    Modified parameters;    Program block;    Program structures;    Thermo-physical parameters;    Water cooling;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/537/3/032094/pdf
DOI  :  10.1088/1757-899X/537/3/032094

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The article describes an example of a casting and rolling complex. A program has been developed for calculating the temperature of the metal in the casting and rolling complex sites which is based on a mathematical model for controlling the water cooling of a rotary mold in TIA Portal software using an S7-1200 microprocessor controller. Presents the structure and user interface of the program. The program blocks of the rotary mold, as well as the section of water and air cooling are developed, which include design and thermophysical parameters necessary for calculating according to the mathematical model. In this way, the replacement of any of them with a similar one with modified parameters is possible without making changes to the program structure. The program can be used to debug control algorithms.