Features of the rotor dynamics of knife refining machines

International Workshop "Advanced Technologies in Material Science, Mechanical and Automation Engineering – MIP: Engineering – 2019"

材料科学;机械制造;原子能学

Vikharev, S.N.^1

Ural State Forest Engineering University, Siberian tract 36, Ekaterinburg

620100, Russia^1

关键词: Automatic balancing;    Hydrodynamic component;    Paper research;    Rotor assembly;    Rotor dynamic;    Tensioners;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/537/3/032015/pdf
DOI  :  10.1088/1757-899X/537/3/032015

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The paper researches the features of the rotor dynamics of knife refining machines. The rotor of these machines turns in the pulp. The total imbalance of the refiner rotor consists of mechanical, hydraulic and hydrodynamic components. The mechanical imbalance of the refiner rotor changes due to the plate wear. In the knife refining machines, it is advisable to use automatic balancing devices to compensate for the imbalance of the rotor during operation of the refiner without stopping it. The methodology for calculating the beats of the rotor plate has been developed and tested. The operational cross-knife gaps of the knife refining machines are comparable to the beats obtained. It is recommended to eliminate gaps in the design of the rotor assembly, i.e. use bearings with tensioner and use a stator to make refiner adjustment. The developed methodology for calculating beats can be used in other similar machines, for example, in centrifugal pumps.