Engineering method for assessing the strength of reinforced concrete beams

International Workshop "Advanced Technologies in Material Science, Mechanical and Automation Engineering – MIP: Engineering – 2019"

材料科学;机械制造;原子能学

Snezhkina, O.V.^1

Department of Descriptive Geometry and Graphics, Penza State University of Architecture and Construction, Penza, Russia^1

关键词: Engineering methods;    Regulatory documents;    Reinforced concrete beams;    Simple beams;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/537/2/022050/pdf
DOI  :  10.1088/1757-899X/537/2/022050

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

A calculation method is proposed that combines two existing methods for calculating the strength of reinforced concrete beams. The author of the article considers the possibility of presenting the work of a reinforced concrete beam in the form of an arch with a curvilinear shape with a puff, which is a statically definable system. The operation of a reinforced concrete beam with a relative span of a slice from 1 to 3 is modeled as an arched system with a horizontal stretched reinforcing belt and a compressed concrete strip of curvilinear shape. The purpose of the tightening in a beam with an average relative cut span is to cancel the bending moment inherent in a simple beam. Thus, this model (arch with tightening) most fully reflects the work of reinforced concrete beams with an average relative cut span compared to the model adopted in regulatory documents.