Energy Efficiency Assessment in Production Line: An Approach towards Sustainable Manufacturing

International Conference on Recent Advances in Industrial Engineering and Manufacturing

工业技术（总论）

Saleh, C.^1 ; Prasetiyo, R.^1 ; Hendradewa, A.P.^1 ; Hassan, A.B.^2

Department of Industrial Engineering, Faculty of Industrial Technology, Islamic University of Indonesia, Yogyakarta, Indonesia^1

Electrical, Electronic and Automation Section, Universiti Kuala Lumpur Malaysian Spanish Institute (UniKL - MSI), Kulim High Technology Park, Kedah, Kulim

09000, Malaysia^2

关键词: Actual conditions;    Energy efficiency assessment;    Energy efficiency improvements;    Energy saving potential;    Industrial sector;    Proper solutions;    Sustainable manufacturing;    Three parameters;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/530/1/012004/pdf
DOI  :  10.1088/1757-899X/530/1/012004

学科分类：工业工程学

来源: IOP

【 摘 要 】

Global demands of energy which causes a quick depletion of the natural energy reserves become a critical concern. Industrial sector is concerned to be the largest energy consumer compared to other sectors. Thus, an energy efficiency improvement tends to be a proper solution in addressing this problem. This work aims to analyse a prospect energy efficiency improvement within a production line. A discrete-event simulation (DES) was used to investigate the energy saving potential and a case study was conducted in a crumb rubber company. Three parameters were taken into consideration to calculate the energy consumption, i.e. processing time, working shift schedule, and machine states. An initial model which represents an actual condition of the manufacturing production line was developed. From the analysis of the initial model result, a recommendation scenario was built. It was shown that a reduction of 8.22% in the energy consumption is achievable by implementing the suggested scenario.