Continuous Casting of High Carbon Steel: How Does Hard Cooling Influence Solidification, Micro - and Macro Segregation?

Joint 5th International Conference on Advances in Solidification Processes;5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining

土木建筑工程;计算机科学

Nicholas Grundy, A.^1 ; Münch, Steve^2 ; Feldhaus, Stephan^2 ; Bratberg, Johan^1

Thermo-Calc Software AB, Solna, Sweden^1

SMS Group, Zurich, Switzerland^2

关键词: Dendrite microstructure;    Phase-field approaches;    Solidification microstructures;    Solidification modeling;    Solidification simulation;    Solute redistribution;    Steep temperature gradient;    ThermoCalc software;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/529/1/012069/pdf
DOI  :  10.1088/1757-899X/529/1/012069

来源: IOP

【 摘 要 】

One technology that is often employed in continuous casting of high-carbon steel billets to minimize centre - (or macro) segregation is hard secondary cooling. Investigations unanimously show, that hard cooling significantly reduces macro-segregation, but a mechanism for the reduced segregation is rarely given. In this paper the solidification of high carbon tire cord grade C80D cast as a 150x150 mm billet is calculated using the proprietary SMS Group solidification simulation package CHILL using steel properties calculated with the Thermo-Calc Software package and TCFE steels database. The obtained cooling rates in the billet for hard and soft secondary cooling are used to run solidification simulations considering solute redistribution using the diffusion module DICTRA. It is shown that for cooling rates achieved in continuous casting the steel solidifies far away from equilibrium. The solidification profile and solidus temperature lie in between the Scheil solidification model and the para-equilibrium Scheil model with carbon defined as a fast diffusing element. The calculated cooling rates and temperature gradients are used to simulate the solidification microstructure 20 mm from the billet surface using the phase field approach and the MICRESS® software package linked to Thermo-Calc through the TQ interface. This model clearly shows, that the most probable mechanism by which hard cooling reduces segregation is trapping of solutes between the intricately branched dendrite microstructure that results from the steep temperature gradients achieved when applying hard secondary cooling.