Impact of gravity-related phenomena on the grain structure formation: comparative study between horizontal and vertical solidification of a refined Al-20wt.%Cu alloy

Joint 5th International Conference on Advances in Solidification Processes;5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining

土木建筑工程;计算机科学

Soltani, H.^1^2 ; Reinhart, G.^1 ; Benoudia, M.C.^3 ; Zahzouh, M.^2 ; Nguyen-Thi, H.^1

Aix Marseille Univ, CNRS, IM2NP, UMR 7334, Campus Scientifique de St-Jérôme, case 142, Marseille Cedex 20

13397, France^1

Badji Mokhtar University, P.O. Box 12, Annaba

2300, Algeria^2

L3M, Ecole Nationale Supérieure des Mines et de la Métallurgie, Annaba, Algeria^3

关键词: Equiaxed solidification;    Growth orientations;    Industrial processs;    Solidification directions;    Solidification fronts;    Solidification parameter;    Solutal convections;    Structure formations;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/529/1/012019/pdf
DOI  :  10.1088/1757-899X/529/1/012019

来源: IOP

【 摘 要 】

On earth, gravity-related phenomena are unavoidable, such as thermo-solutal convection caused by density gradients in the melt and buoyancy when the liquid phase is denser than the solid phase. Such phenomena can drastically affect both the grain density and their morphology during equiaxed solidification processes. For these reasons, fundamental studies comparing the influence of solidification parameters with and without gravity effects are important to obtain benchmark data, which are useful to understand and then control the final structure of materials in industrial processes. In the present work, the impact of the solidification parameters on the dendritic grain structure formation and on the final grain size and shape was investigated in situ by using X-radiography for different growth orientations with respect to gravity. In a first step, experiments were carried out with various solidification parameters and with the furnace in horizontal position, with the main surface of the sample being perpendicular to gravity to limit gravity-related phenomena. In a second step, experiments were carried out with identical solidification parameters but with the furnace in a vertical position, and for two solidification directions (upward and downward). A comparative study between horizontal and vertical experiments was carried out. Phenomena related to gravity have been highlighted and their respective impact on the solidification front propagation was analysed.