Analysis of Increasing Quality of Surfactant Powder at Oversize Parameter Using PDCA and FMEA in PT BCCI

11th International Seminar on Industrial Engineering & Management, "Technology and Innovation Challenges Towards Industry 4.0 Era

工业技术（总论）

Prasetyani, R.^1 ; Huda, A.T.^1 ; Ningtyas, D.R.^1

Jurusan Teknik Industri, Fakultas Teknik, Universitas Pancasila, Jl. Lenteng Agung Srengseng Sawah, Jagakarsa, Jakarta Selatan, Indonesia^1

关键词: Batch process;    Evaporation systems;    FMEA;    PDCA;    Production process;    Quality of product;    Quality product;    Surfactant powders;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/528/1/012075/pdf
DOI  :  10.1088/1757-899X/528/1/012075

学科分类：工业工程学

来源: IOP

【 摘 要 】

Quality of product is the important thing for PT BCCI in order to compete with other chemical industry of surfactant. In the production process of surfactant powder the particle size of the product is bigger than screener with mesh size 30 will produce oversize reaching 30% from every batch of products, indicates there is an issue that to be fixed immediately. This research was to find out the root of problem and action to improve the quality product and increase the output. PDCA and FMEA method were used to resolve these problems. The results are priority problem that needs to be improved based on the highest RPN value is the machine on the product evaporation system is the less working Vacuum maximum and the product temperature is less high. The product temperature need increase to 60°C which was previously 58°C and pressure on Vacuum