Performance of Cement Mortar Composites Reinforced with Polyvinyl Alcohol Fibers

2nd International Conference on Sustainable Engineering Techniques

工业技术（总论）

Abbas, Waleed A.^1 ; Gorgis, Ikbal N.^1 ; Hussein, Mahdi J.^1

University of Technology, Baghdad, Iraq^1

关键词: Chemical compositions;    Fiber volume fractions;    Hydrophobic nature;    Performance of cement;    Poly (vinyl alcohol) (PVA);    Polyvinyl alcohol fiber;    Reinforced cement mortar;    Volume frictions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/518/2/022045/pdf
DOI  :  10.1088/1757-899X/518/2/022045

学科分类：工业工程学

来源: IOP

【 摘 要 】

This research studied the hybridization influence of polyvinyl alcohol (PVA), in the first stage as solution and the second added fibers with PVA solution. Performance under flexural loads of cement mortar composite was studied on this basis, PVA concentration in solution used was 1% of cement weight with three PVA fiber volume fraction (1%, 2% and 3%)which were considered as the variables for constant PVA solution to cement ratio (P/C) and w/c ratio as1.6% and 30% respectively. This paper is specially concentrating on the impact of fiber volume fraction contents and their metis to deform composite. The specimens were tested under one-point load test next two days wet curing and 26daysdry curing. The testes exhibited both ductility and flexural strength of cement matrix increased when the fiber volume fraction content increased. Combination only PVA fibers with the cement mortar composite showed softening in strain behaviors, whereas its performance is brittle for PVA solution-containing specimens, but mixture of PVA fiber with PVA solution to the cement mortar composites showed strain hardening performance. PVA fibers and solution in both surface properties (hydrophilic and / or hydrophobic nature) and chemical composition improved area under the curve of the reinforced cement mortar composites at 2% volume friction of PVA fiber with PVA solution about 197%, 29% and 9.6% compare with 1%, 3% volume friction of PVA with PVA solution and 2% without solution respectively. The addition 2% of PVA fibers increased about 44% flexural strength compare to the control specimens at flow diameter 190mm and 63% compare with 3% at flow diameter130 mm. It is given away that a uniform spreading of fibers through the bulk of the composite material is vital to its outstanding workability. Finally, it was observed fraction of PVA fibers plays as a result a significant role for refining ductility of cement mortar composites.