Dynamic optimization of a dual-axis solar tracker for PV modules

Product Design, Robotics, Advanced Mechanical and Mechatronic Systems and Innovation Conference

工业技术（总论）;机械制造

Marcu, A.^1 ; Alexandru, C.^1 ; Barbu, I.^1

Product Design, Mechatronics and Environment Department, Transilvania University of Braov, Romania^1

关键词: Dynamic optimization;    Energetic efficiency;    Global coordinates;    Multi Body Systems;    Optimal design algorithms;    Photovoltaic modules;    Software solution;    Tracking mechanism;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/514/1/012037/pdf
DOI  :  10.1088/1757-899X/514/1/012037

学科分类：工业工程学

来源: IOP

【 摘 要 】

This paper deals with the dynamic optimization of the dual-axis tracking mechanism, which is used for increasing the energetic efficiency of a photovoltaic module, by maximizing the rate of incident solar radiation. The study is based on the optimal design algorithm included in the commercial MBS (Multi-Body Systems) software solution ADAMS, through the parameterization of the virtual model, which offers the possibility to perform a series of studies aiming at identifying the design parameters that decisively influence the dynamic behavior of the tracking systems. The global coordinates of the design points (i.e. the mounting points of the actuating sources) are defined as design variables for the optimization process, while the design objectives refer to the power consumptions of the actuating sources.