Experimental Researches concerning the Rheology of Cutting Fluids

Product Design, Robotics, Advanced Mechanical and Mechatronic Systems and Innovation Conference

工业技术（总论）;机械制造

Radulescu, I.^1 ; Radulescu, A.V.^1 ; Ramalchanov, S.^2 ; Yankov, S.^2 ; Rupetsov, V.S.^2

University POLITEHNICA Bucharest, Romania^1

Paisii Hilendarski University of Plovdiv, Technical College of Smolyan, Smolyan, Bulgaria^2

关键词: Apparent viscosity;    Brookfield viscometers;    Chemical and physical characteristics;    Chip-tool interfaces;    Cone and plate;    Experimental research;    Rheological parameter;    Rheological property;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/514/1/012007/pdf
DOI  :  10.1088/1757-899X/514/1/012007

学科分类：工业工程学

来源: IOP

【 摘 要 】

Cutting fluids are used to reduce the negative effects of the heat and friction on both tool and work piece. The cutting fluids produce three positive effects in the process: heat removal elimination, lubrication on the chip-tool interface and chip removal. This paper proposes to study the rheological properties of four different type of cutting fluids, as function of their chemical and physical characteristics. The tests were performed using a cone and plate Brookfield viscometer, by determining the rheological parameters and the variation of the apparent viscosity with the temperature. This approach has been used to quantify the performance of the tested products and to compare products in the marketplace.