Polycondensation processes occurring during 3D aerosol printing with new ceramic materials based on nanostructured highly dispersed fillers of polyaluminosilicates used in nano- and microelectronics and medicine

7th International Conference for Young Scientists "High Technology: Research and Applications"

工业技术（总论）

Ivanov, A.A.^1 ; Polyushko, V.A.^2 ; Khomyakov, A Yu^1

Tomsk State University of Control Systems and Radio Electronics, 40 Lenin Avenue, Tomsk

634050, Russia^1

Tomsk State University, 36 Lenin Avenue, Tomsk

634050, Russia^2

关键词: Aerosol generation;    Aerosol printings;    Ceramic dielectrics;    High thermal conductivity;    Low temperature ceramics;    Supramolecular structure;    Synthesis stages;    Synthesized materials;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/510/1/012023/pdf
DOI  :  10.1088/1757-899X/510/1/012023

学科分类：工业工程学

来源: IOP

【 摘 要 】

A new low temperature ceramic material for 3D printing based on polyaluminosilicate has been synthesized. Some of the synthesis stages are controlled by the parameters set for 3D aerosol printing. The processes of 3D aerosol printing of polyaluminosilicates filled with a highly dispersed filler have been studied. An optimal method for aerosol generation has been chosen that does not affect the supramolecular structure of a polyaluminosilicate binder. Ceramic dielectric topologies with high thermal conductivity and layer thickness in the nanometer range have been obtained by means of 3D aerosol printing of the synthesized material for the first time.