Mechanical Properties Characterization of Marble and Resin Composite Materials

1st South Aceh International Conference on Engineering and Technology

工业技术（总论）

Husaini^1 ; Ihsan, I.^2 ; Nizar Machmud, M.^1 ; Sandi Yudha, B.Z.^3 ; Anhar, M.P.^2

Mechanical Engineering Department, Engineering Faculty, Universitas Syiah Kuala, Banda Aceh, Indonesia^1

Mechanical Engineering Department, Polytechnics of South Aceh, Tapaktuan, Indonesia^2

Mechatronics Engineering Department, Polytechnics of Aceh, Banda Aceh, Indonesia^3

关键词: Fracture surfaces;    House construction;    Marble powder;    Optimal composition;    Optimal values;    Resin composites;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/506/1/012045/pdf
DOI  :  10.1088/1757-899X/506/1/012045

学科分类：工业工程学

来源: IOP

【 摘 要 】

The process of forming furniture and house construction, the marble used produces a lot of waste in the form of marble powder. One solution offered to overcome this problem is to make a composite of marble's powder and resin. The purpose of this study was to determine the tensile strength and hardness of resin composites and marble's powder and determine the optimal value of the composition between marble's powder and resin. These composites were then tested to obtain mechanical properties such as yield strength, elastic modulus and hardness. Fracture surface observation by using SEM on the specimens was also conducted. The results showed that the optimal composition for composites is the composition between 60/40 and 70/30.