Overall Equipment Effectiveness Analyse for Performance of CNC Milling Machine Operation

1st International Conference on Industrial and Manufacturing Engineering

工业技术（总论）;机械制造

Hernadewita^1 ; Hermiyetti^2 ; Hendra^3 ; Syukriah^4 ; Astari Surbakti, R.^5 ; Marizka, Dewi Auditiya^1

Industrial Engineering, University of Mercubuana, Jakarta Jl. Menteng, Jakarta, Indonesia^1

Faculty of Economics, Bakrie University, Jakarta, Indonesia^2

Mechanical Engineering Dept., University of Bengkulu, Bengkulu, Indonesia^3

Industrial Engineering University of Malikussaleh, Lhokseumawe Aceh, Indonesia^4

PT Miaramas Plantation (Sime Darby Group), Jakarta, Indonesia^5

关键词: CNC milling machine;    Defective products;    Maintenance systems;    Overall equipment effectiveness;    Overall equipment efficiency;    Production activity;    Reduced production;    Total productive maintenance;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/505/1/012139/pdf
DOI  :  10.1088/1757-899X/505/1/012139

学科分类：工业工程学

来源: IOP

【 摘 要 】

Overall equipment efficiency (OEE) is a large part of the maintenance system used by Japanese companies; Total Productive Maintenance (TPM). The value of OEE is affected by the often problematic production activities in machinery/production equipment such as damage to machine components resulting in reduced production, lowering engine production speed, preparation length and adjustment time, resulting in defective products and operating machines but not producing products. This paper will focus on the overall equipment efficiency of CNC Milling machine. The indicators of data parameter are used planned downtime, ideal cycle times, real-time cycles and daily operator reports (daily schedule controls) and direct data retrieval in the field. Where OEE calculation depends on availability, performance of efficiency, and rate of quality. The result has shown that the value of availability is 87%, performance of efficiency is 93% and OEE is 74%.