STATIC SIMULATION OF E-BIKE TILTING THREE-WHEELED FRAME STRUCTURE USING THE FINITE ELEMENT METHOD

International Conference on Mechanical Engineering Research and Application

Syehan, Aufar^1 ; Pamungkas, Anjas Trihatmojo^1 ; Sumarsono, Danardono Agus^1

University of Indonesia, Mechanical Engineering Department, Depok

16424, Indonesia^1

关键词: frame;    Minimum factor of safeties;    Simulation software;    Static simulations;    Static strength;    Structural strength;    three-wheeled tilting;    Urban vehicles;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/494/1/012088/pdf
DOI  :  10.1088/1757-899X/494/1/012088

来源: IOP

【 摘 要 】

The purpose of the present study was to estimate the static strength of the frame structure developed from the initial tilting three-wheeled electric bike design using the Finite Element Analysis (FEA) assisted by the Static SOLIDWORKS Simulation software with a configuration of two wheels located at the front and one wheel at the back position. The main consideration of structural strength was seen from the point of view of the distribution of static loads using three types of materials (6061-T6 aluminium, AISI 1020 Steel and CFRP). The minimum factor of safety resulting from the initial design simulation was estimated to be 1.84.