Liquid Smoke Potential Solution on Texture and Bonding Sago Fiber-Matrix

International Conference on Mechanical Engineering Research and Application

Mukhlis, M.^1 ; Budi, Sofyan Arif Setya^2 ; Wardana, I.N.G.^2 ; Kamil, Kusno^3

Department of Mechanical Engineering, Khairun University, Gambesi Utara, Ternate, Indonesia^1

Department of Mechanical Engineering, Brawijaya University, Jl. MT. Haryono 167, Malang

65145, Indonesia^2

Department of Mechanical Engineering, Indonesia Moeslim University, Jl. Urip Sumoharjo KM. 5, Panakkukan, Makasar, Indonesia^3

关键词: Digital microscopes;    Fiber matrix;    Fiber texture;    Liquid smoke;    Sago;    Time variations;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/494/1/012029/pdf
DOI  :  10.1088/1757-899X/494/1/012029

来源: IOP

【 摘 要 】

The purpose of this research is to know the influence of sago fiber (SF) treatment with liquid smoke to the texture and bonding of fiber-matrix. Sago fiber was given two stage of treatment: (1) immersion the fibers with the liquid smoke with the time variation of 1, 2, 3, and 4 hours. (2) Then, the fiber is heating in the heater box at a temperature of 43 degree Celsius during 1 hour. Sago fiber, which have run into treatment and without treatment are grouped, then conducted a series of tests, namely: observation of the fiber texture and observations of bonding between fiber and matrix to figure out the shape of the texture and the bonding of fiber-matrix before and after the treatment with a digital microscope. The observations indicate that the treatment of fiber with the fiber texture form a liquid smoke into a grooved and the more rugged so the bond between fiber and matrix of the more compact.