Review of Manufacturing Process for Good Quality of Composite Assessment

4th International Conference on Mechanical, Automotive and Aerospace Engineering

机械制造;航空航天工程;运输工程

Zulkepli, I.I.^1 ; Mokhtar, H.^1 ; Aminanda, Y.^1 ; Shaik Dawood, M.S.I.^1 ; Rehan, M.S.M.^1

Department of Mechanical Engineering Kulliyyah of Engineering, International Islamic University Malaysia, Jalan Gombak, Kuala Lumpur

53100, Malaysia^1

关键词: Closed condition;    Direct contact;    Fabrication method;    Fiber types;    Manufacturing industries;    Manufacturing process;    Review papers;    Surface conditions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/488/1/012008/pdf
DOI  :  10.1088/1757-899X/488/1/012008

学科分类：航空航天科学

来源: IOP

【 摘 要 】

This review paper focuses on the detailed technique and process of fiber fabrication until it becomes composite which is useful for the manufacturing industry. The most famous fabrication methods are the open and closed mould. In general, open mould is a method which exposes the specimen to the atmosphere and the surface condition is not controlled. Close mould, however, is the opposite to open mould, that is in closed conditions without direct contact of the atmosphere and the surface condition is controllable. The manufacturing process techniques are presented comparatively. Discussion on fiber type that is more suitable for specific techniques are also presented in this paper.