Experimental Research on NOx Emission Characteristics During Coal Combustion in the Stoker-fired Boiler

5th Annual International Conference on Material Engineering and Application

工业技术（总论）;材料科学

Guo, Xinwei^1 ; Zhang, Zhongxiao^1 ; Yu, Juan^2 ; Zhang, Jian^1 ; Bi, Degui^2 ; Dong, Jiancong^2 ; Bai, Hao^1 ; Fan, Junjie^1

Key Lab. of High-Efficiency Combustion and Ultra-Low Emission of Coal (Gas) in Mechanical Industry, University of Shanghai for Science and Technology, Yangpu District, Shanghai

200093, China^1

School of Mechanical Engineering, Shanghai Jiaotong University, Minhang District, Shanghai

200240, China^2

关键词: Combustion stability;    Experimental research;    Furnace temperatures;    Hot-water supply;    Key characteristics;    Non-catalytic reactions;    Stoker fired boilers;    Temperature peaks;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/484/1/012023/pdf
DOI  :  10.1088/1757-899X/484/1/012023

来源: IOP

【 摘 要 】

In this paper, the combustion stability and nitrogen oxides (NOx) emissions test were made in two coal-fired chain grate boilers with hot water supplies of 29MW and 46MW. The investigations aim to clarify the key characteristics of NOx emission, e.g.instability of NOx emission, temperature and gaseous components profiles and the unsteady variation of NOx emission with power level changing. Main conclusions include: 1) In the process of stable combustion, NOx emissions still have±5% fluctuations, it is not stable. 2) The furnace temperature distribution show double temperature peaks. One peak (∼1500°C) is located on the burning solid-fuel surface on the chain grate, and the other (∼1050°C) is ∼5.6m above the arch. 3) With increasing the thermal power, NOx emission shows a dramatic increase, higher around 1.25 times, as due to the rapid adjustment of coal feeding in grate furnace. Those above show the NOx control difficulty and the proper injector location of SNCR (selective non-catalytic reaction), which is key data collected for further NOx reduction retrofits.