Structural design and simulation analysis of the carbon fiber-reinforced polymer main frame of a mapping camera system

7th Global Conference on Materials Science and Engineering

工业技术（总论）;材料科学

Wang, Q.L.^1 ; Wang, W.Z.^1 ; Wang, Q.X.^1 ; Jiang, H.J.^1 ; Zhou, X.H.^1 ; Zhang, L.^1

Beijing Institute of Space Mechanics and Electricity, China^1

关键词: Carbon fiber reinforced polymer;    Critical structures;    Design and simulation;    Frequency response analysis;    Mechanical action;    Mechanical environment;    Simulation analysis;    Structural stiffness;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/474/1/012031/pdf
DOI  :  10.1088/1757-899X/474/1/012031

来源: IOP

【 摘 要 】

The main frame is the primary load-bearing component of a mapping camera system. As the critical structure of the system, the main frame determines the mechanical properties of a camera system. The main frame design is hindered by its large size, complicated interface, as well as high-stability, high-frequency requirement, and lightweight requirements. During the launching process, the main frame should be able to withstand the mechanical action of the active section without affecting the performance of the camera system. This paper describes the design scheme of the main frame. The modal analysis, static analysis and frequency response analysis of the main frame are performed. The simulation analysis results prove that the natural frequency of the mapping camera system satisfies the design requirements and the main frame satisfies the required safety margin in the linear overload in X-, Y-, and Z-directions. Moreover, under condition of the frequency response in X-, Y-, and Z-directions, the main frame has excellent structural stiffness, which provides a proper mechanical environment for the camera system. The design scheme of the main frame is reasonable and feasible.