Improved Heat Transfer Correction Method for Turbocharger Compressor Performance Measurements

2018 4th International Conference on Mechanical Engineering and Automation Science

机械制造;原子能学

Huang, Liyong^1 ; Ma, Chaochen^1 ; Li, Yanzhao^2 ; Gao, Jianbing^1 ; Qi, Mingxu^1

School of Mechanical Engineering, Beijing Institute of Technology, Beijing

100081, China^1

Shouguang Kangyue Turbocharger Ltd, Weifang

262711, China^2

关键词: Adiabatic efficiency;    Compressor efficiency;    Compressor performance;    Different operating conditions;    Heat transfer properties;    Internal heat transfer;    Transfer phenomenon;    Turbocharger compressor;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/470/1/012002/pdf
DOI  :  10.1088/1757-899X/470/1/012002

来源: IOP

【 摘 要 】

The compressor adiabatic performance map is important for turbocharger matching with engine. Its accuracy was affected by the heat transfer phenomenon in the turbocharger. The corrected method for compressor performance measurement which affected by heat transfer was widely investigated by some authors. The aim of this work was to measure compressor adiabatic efficiency by simplified method, and estimated the effects of internal heat transfer on compressor efficiency. This approach only added five temperature sensors on the turbocharger based on the standard instruments and doesn't need other special instruments, and the heat transfer properties of turbocharger and compressor adiabatic efficiency could be calculated by lumped model. This method was validated by other experiments. Finally, the heat absorbed by compressor under different operating conditions was analyzed by this method. The results showed water-cooling was main influenced factor, and water-cooling was a barrier for heat transfer from turbine to compressor.