Leak detection in a pipe using Fibre Bragg Grating sensor

1st International Postgraduate Conference on Mechanical Engineering

工业技术（总论）;机械制造

Loman, M.^1 ; Hafizi, Z.M.^1

Faculty of Mechanical Engineering, University Malaysia Pahang, Pekan, Pahang

26600, Malaysia^1

关键词: Different sizes;    Fibre Bragg grating sensors;    Galvanized steel pipes;    Oil and gas transportation;    Pipe-line systems;    Pressure change;    Reliable methods;    Voltage drop;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/469/1/012111/pdf
DOI  :  10.1088/1757-899X/469/1/012111

学科分类：工业工程学

来源: IOP

【 摘 要 】

Being the main and safest oil and gas transportation method globally, the integrity and condition of pipeline system is very crucial. The offline existing maintenance method might have consumed more time and risky as it does not detect the flaws immediately after it is formed. This paper focused on the detection of the leak detection in pipes using the Fiber Bragg Grating pressure transducer. Two different sizes of artificial leak were introduced on the pipe in order to measure the applicability of the FBG sensor in detecting the leak in a pipe. The FBG signals were acquired on a galvanized steel pipe in lab scale size equipped with 5 pairs of valve. During the experimental work execution, the FBG sensor was attached on the pressure transducer that is linked to the pipeline. Findings showed that bigger leak size contributed to higher voltage drop in the pipe which was 0.0075 V compared to 0.0017 V. This study shows that FBG is a reliable method to be utilised in leak detection because it is very sensitive towards pressure changes in pipe. The results also showed that FBG exhibits good uniformity.