Magnetorheological finishing on metal surface: A review

1st International Postgraduate Conference on Mechanical Engineering

工业技术（总论）;机械制造

Mutalib, N.A.^1 ; Ismail, I.^1 ; Soffie, S.M.^1 ; Aqida, S.N.^2

Faculty of Manufacturing Engineering, University Malaysia Pahang, Pekan, Pahang

26600, Malaysia^1

Faculty of Mechanical Engineering, University Malaysia Pahang, Pekan, Pahang

26600, Malaysia^2

关键词: Abrasive particles;    Magnetorheological finishing;    Magnetorheological polishing;    Metal surfaces;    Polished surfaces;    Rheological property;    Surface from;    Three-dimensional profiles;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/469/1/012092/pdf
DOI  :  10.1088/1757-899X/469/1/012092

学科分类：工业工程学

来源: IOP

【 摘 要 】

Magnetorheological finishing (MRF) process is capable to fabricate an ultra-fine surface from flat to three-dimensional profile structures using Magnetorheological polishing fluid MRPF). MRPF is a smart fluid that can change from liquid to near solid state under the influences of magnetic field. Abrasive particle is essential material in MRPF. Three main methods in MRF process are reviewed including composition of the MRPF, rheological properties and polished surface quality.