Commutator fault detection of brushed DC motor using thermal assessment

1st International Postgraduate Conference on Mechanical Engineering

工业技术（总论）;机械制造

Wahab, Abbas A.^1 ; Abdullah, N.F.^1 ; Rasid, M.A.H.^1

Faculty of Mechanical Engineering, Universiti Malaysia, Pahang

26600, Malaysia^1

关键词: AC induction motors;    Carbon impurities;    Characteristic temperature;    K-type thermocouples;    Steady-state temperature;    Thermal assessment;    Thermal behaviours;    Thermal signatures;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/469/1/012057/pdf
DOI  :  10.1088/1757-899X/469/1/012057

学科分类：工业工程学

来源: IOP

【 摘 要 】

In this paper fault detection of brushed DC motor is described. Recently, Thermal Signature Analysis (TSA) has become a common tool for fault analysis of AC induction motors. Currently, very little research has been performed using thermal signature analysis on brushed DC motors. This paper is a present fault detection of DC motors using thermal signature analysis. In order to organize the detection, the thermal behaviour of DC motor was analysed using the K-type thermocouple with data logger. The thermocouples were mounted on 4 part of the DC motor, casing, permanent magnet, brush and bearing. The initial measurements of thermal behaviour were realized by using healthy DC motor as a sample of a thermal behaviour. Furthermore, the measurements of thermal behaviour for the same type of motor with thick carbon impurities on commutator has been implemented to compare with the thermal behaviour of healthy DC motor. The significant observation on steady state temperature of thermal behaviour between healthy DC motors and faulty DC motor will be analysed. From the analysis of thermal behaviour between healthy DC motor and commutator fault DC motor, that can clearly recognize the commutator fault by through the different of characteristic temperature profile of DC motor.