The Effect of Tube Length and Cold Exit Diameter on The Cold Flow Temperature of Vortex Tube Using High Temperature Working Gas

1st International Postgraduate Conference on Mechanical Engineering

工业技术（总论）;机械制造

Suhaimi, Muhammad Fadhli^1 ; Yusof, Mohd Hazwan^1

Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Pekan, Pahang

26600, Malaysia^1

关键词: Chemical process;    Cold streams;    Compressed gas;    Cooling process;    Exit diameter;    Free software;    High temperature;    Working gas;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/469/1/012040/pdf
DOI  :  10.1088/1757-899X/469/1/012040

学科分类：工业工程学

来源: IOP

【 摘 要 】

Vortex tube has been using widely in industry for the cooling process. It is working as a refrigerator which split compressed gas into the hot and cold stream without using any electrical or chemical process. In term of application, the effect of geometrical parameters on the cold flow temperature of vortex tube by using high temperature compressed gas is obscure, and effect of certain working gas has yet to be vigorously researched. Thus, the objective of this analysis is to determine the effect of length of the vortex tube, cold exit diameter and different high temperature working gas. There are 3 different tube length, 3 different cold diameter, and 7 different types of gas are used. The models are designed from SolidWork with several parameters. Simflow, which is free software, is selected to analyse the effect on model numerically. From the results, it is clear that the optimum tube length, cold exit diameter, and working gas are L = 175 mm, d = 4 mm and helium, respectively.