Design Steering System with Independent Front Wheel Drive of The Hybrid Vehicle-Air Pressure and Electrical

1st International Conference on Advanced Engineering and Technology

工业技术（总论）

Setyono, B.^1 ; Patriawan, D.A.^1 ; Putra, A.W.^1 ; Irawan, H.^1 ; Zuliari, E.A.^2

Department of Mechanical Engineering, Institut Teknologi Adhi Tama Surabaya, Surabaya, Indonesia^1

Department of Electrical Engineering, Institut Teknologi Adhi Tama Surabaya, Surabaya, Indonesia^2

关键词: Air pressures;    Alternative vehicles;    Different speed;    Electrical propulsion;    Front-wheel drives;    Rotating speed;    Space requirements;    Steering systems;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/462/1/012013/pdf
DOI  :  10.1088/1757-899X/462/1/012013

学科分类：工业工程学

来源: IOP

【 摘 要 】

The development of alternative vehicle were continued by designing hybrid vehicle that using compressed air and electrical propulsion. This compressed air propulsion on the rear wheels and two electric motor as a front wheel drive (FWD) were installed independently, where left and right can rotate with different speeds and direction. Independent FWD could be a problem when two wheels has a different rotation. The first experiment was tested by measuring the rotation per minute (RPM) on each wheel. Measurement were performed by varying the position of the throttle pedal. The result of measurements on both wheels rotating speed showed a difference of 1 %. The second test was to compare the space requirement, which derived from the function of cornering radius. Space requirement for inactive vehicle cornering system is 4.52 meters and 3.39 meters when system is active.